Top > We look for from organization > Yamanashi Industrial Technology Center

It is the text from here.

Yamanashi Industrial Technology Center

 

Announcement about some resumption of duties(PDF: 127KB)

  Center summaryThe use guidanceMedium-term administration planWhat's NewEvent informationLinkAccess  
 

top-4

 

 

 

Management, cooperation promotion center

  • General Administration Division
  • Plan cooperation promotion part

kit_top

Kofu technological assistance center

Fuji technological assistance center

  • Fiber Engineering Department
  • Machine electron Engineering Department

fit_top

 

 

 

 Notice (to all of the use of center) of parking lot accompanied with construction

When parking lot of the center yard was full, we showed around eye Messe third parking lot,

From Tuesday, September 1 to Friday, October 16 (plan), eye Messe third parking lot cannot park for maintenance.

I am sorry to trouble you, but when this period, parking lot of the center yard are full,

We would appreciate your using eye Messe second parking lot. Details

 What's New

2020

 
September 15 We added "automization, robot introduction consecutive course" to event information.
September 9 We published memoir in 2019.
August 20 We added "the manufacturing personnel training training" to event information.
July 7 We published the latest issue of center news.
July 7 We published annual report in 2019.
July 3 We added "information technology class" (IoT programming simple in Node-RED) to event information.
June 25 We published about some reopening of support task.
June 3

We published results of research breaking news in 2019.

Results of research presentation that you held in April in usual is the situation that you cannot hold under the influence of new coronavirus yet, but please utilize as you publish results of research breaking news of 2019.

April 20

It produces face shields and raises the prefecture medium and small-sized businesses which you can provide. (Yamanashi infection prevention face shielding project) (offer closed)

April 13 We published request about new coronavirus infectious disease.
March 2 We established AI/IoT-related consultation desk.

Main duties

Technological assistance

Use of facilities, request test

Reporting

You can see data version of publication to issue in center

We send event information such as classes in e-mail magazine

We comment on facilities and study of center clearly

You can see the production general condition that sannashikenkinujin*oributsukogyokumigo investigated

 

Research and development

We publish list of study themes of Current year

We introduce industrial property right of center

Center carries out research and development problem that is hard to support in company

We announce evaluation result of study by outside evaluation committee member

Personnel training

We accept employee of medium and small-sized business for a certain period of time and carry out the training

We dispatch staff of center to companies directly and carry out course

 

 Event information

About measures to new coronavirus

In holding of workshop, class, we carry out after infection such as securing of enough distance of participant, ventilation in venue took measures.

Participating person wears mask by all means, and please cooperate with finger disinfection with antiseptic solution installed in evil center.

※Please confirm "we ask to all of you visited an office" of mention here.

 

  • Automization, robot introduction consecutive course Description new!!

The first: Wednesday, October 7, 2020 1:20 p.m. ...

The second: Monday, October 19, 2020 1:20 p.m. ...

The third: Friday, November 20, 2020 1:20 p.m. ...

Holding place: Online holding (ZOOM)

 

  • Manufacturing personnel training training Description new!!

The date and time: Monday, July 27, 2020 1:30 p.m. ...

Holding place: 2094, Otsumachi, Koufu-shi (Kofu technological assistance center)

Point of HACCP introduction in 1-A. confectionery

The date and time: Tuesday, September 8, 2020 3:00 p.m. ...

Point of HACCP introduction in 1-B. miso soy sauce production

The date and time: Wednesday, September 9, 2020 2:00 p.m. ...

2.Introduction to WEB meeting that can easily conjugate in telework and office

The date and time: Tuesday, September 15, 2020 1:30 p.m. ...

3.Inflection ... of 3D scan data using making method - Zbrush of deformation 3D model

The date and time: Thursday, September 24, 2020 1:30 p.m. ...

4.Geometry clearance (Kofu venue) to interpret machine design drawing definitely

The date and time: Tuesday, October 13, 2020 1:00 p.m. ...

5.Introduction to IoT system development utilizing Node-Red

The date and time: Wednesday, October 21, 2020 1:30 p.m. ...

6.Basic knowledge of steel and nonferrous metal materials

The date and time: Monday, October 26, 2020 1:30 p.m. ...

7.Basic training of plating

The date and time: Thursday, October 29, 2020 2:00 p.m. ...

8.Foundations of vernier calipers micro meter

The date and time: Tuesday, November 10, 2020 1:30 p.m. ...

About food indication mainly on allergy to 9-A. indication

The date and time: Friday, November 13, 2020 10:00 a.m. ...

About food indication mainly on allergy to 9-B. indication

The date and time: Friday, November 13, 2020 2:00 p.m. ...

10.The basics of surface roughness measurement

The date and time: Thursday, November 19, 2020 1:30 p.m. ...

11.Principle and application of the fluorescence X-rays analysis

The date and time: Friday, November 27, 2020 1:30 p.m. ...

12.Materials evaluation by x-ray diffraction

The date and time: Thursday, December 3, 2020 1:30 p.m. ...

13.Understanding of geometry clearance to deepen in the measurement training

The date and time: Thursday, December 17, 2020 1:00 p.m. ...

Holding place: 6-16-2, Shimoyoshida, Fujiyoshida-shi (Fuji technological assistance center)

14.Market and manufacturing 1 after corona

The date and time: Friday, August 21, 2020 1:30 p.m. ...

15.Market and manufacturing 2 after corona

The date and time: Beginning of September, 2020 1:30 p.m. ...

16.Kio of the surface roughness measurement

The date and time: Thursday, September 17, 2020 1:30 p.m. ...

17.The basics of ultimate analysis to perform in nondestructiveness

The date and time: Thursday, October 8, 2020 10:00 a.m. ...

18.Training of ultimate analysis to perform in nondestructiveness

The date and time: Thursday, October 8, 2020 1:00 p.m. ...

19.Geometry clearance (Fujiyoshida venue) to interpret machine design drawing definitely

The date and time: Thursday, December 10, 2020 1:00 p.m. ...

We come back to the top of page

E-mail magazine

In Yamanashi Industrial Technology Center, we deliver e-mail magazine.

Commencing with information of class, all of you send the latest information that "knows, and profits" about subsidy business which the prefecture, country invites public participation for quickly. Please register.

E-mail magazine registration Description

We come back to the top of page

 Link (related site)

JKAbanner2
In our center, we introduce facilities using supporting business of JKA.
Supporting business homepage of bicycle race & auto race


shikenjoteki
It is official blog "shikenjoteki" of Fuji technological assistance center fiber Engineering Department. Check it out!


Jewel box of Yamanashi technology
We introduce "company" and "person" having shining technique in Yamanashi.
Contact Yamanashi Industry and Labor Department Business Innovation Support Division


Style crystal jewels and ornaments craftsman archive of craftsman
We publish latest jewelry and anthology.


MTEP
It is overseas development support service for medium and small-sized business which Tokyo and 9 prefectures public facilities examination research organization (Tokyo, Ibaraki, Tochigi, Gunma, Saitama, Chiba, Kanagawa, Yamanashi, Nagano) cooperates, and carries out.


Kaiki silk museum
Kaiki silk museum
Yamanashi Industrial Technology Center Fuji technological assistance center is management, site to run to publicize "kaiki silk" which is traditional textile of Yamanashi.


OLD_FABRIC_COLLECTION_ banner
We release "OLDFABRICCOLLELTIONVisualIndex" which we can use as index of the dough sample book goods.


Yamanashi design archive
It is website delivering various design sauce of Yamanashi. Check it out!


We come back to the top of page

Contact information

We heard general Inquiries in "management, cooperation promotion center". The following maps express Address of "management, cooperation promotion center" which Kofu City has. Please confirm Description about Address of each facility on homepage of each facility.

Tel: 055-243-6111Fax: 055-243-6110

E-mail:yitc-cap @ pref.yamanashi.lg.jp ※Please give me @ on half size

We come back to the top of page

Each facility introduction

Management, cooperation promotion center
Kofu technological assistance center
〒400-0055
2094, Otsumachi, Koufu-shi access
[Tel] 055-243-6111
[Fax] 055-243-6110
Wine Engineering Department 〒409-1316
2517, Katsunumachokatsunuma, Koushu-shi access
[Tel] 0553-44-2224
[Fax] 0553-44-2385
Fuji technological assistance center 〒403-0004
6-16-2, Shimoyoshida, Fujiyoshida-shi access
[Tel] 0555-22-2100
[Fax] 0555-23-6671

We come back to the top of page

Map

Link to Googlemap

To downloading page of Adobe Acrobat Reader

When you see file of Portable Document Format, Adobe Acrobat Reader is necessary. Please download that does not have Adobe Acrobat Reader free from link of banner.

For more information about this page, please contact:

Yamanashi Industry and Labor Department Industrial Technology Center 
Address: 〒 400-0055 2094, Otsumachi, Koufu-shi
Phone number 055(243) 6111 fax number: 055(243) 6110